Solaris 9 安装指南

admin · 发表于 2006-12-1 21:21:51

sun服务器Solaris9安装

1、开机上电，等待显示器亮后，按Stop-a键。如果是在终端上安装，按Ctrl-Break键。
这时，服务器进入OK监控状态：
OK
2、将Solaris9系统盘Software 1/2插入DVD/CD-ROM，并在OK提示符下输入以下命令：
OK boot cdrom
这时，服务器从光盘上开始引导系统
3、等待一会，，系统出现如下提示：
Select a Language

   0. English
   1. French
   2. German
   3. Italian
   4. Japanese
   5. Korean
   6. Simplified Chinese
   7. Spanish
   8. Swedish
   9. Traditional Chinese

Please make a choice (0 - 9), or press h or ? for help:

这是选择语言，请注意，在这里一定要选择 0. English
输入0后按回车键；

4、出现如下提示：
Select a Locale

   0. English (C - 7-bit ASCII)
   1. Albania (ISO8859-2)
   2. Australia (ISO8859-1)
   3. Belgium-Flemish (ISO8859-1)
   4. Belgium-Flemish (ISO8859-15 - Euro)
   5. Bosnia (ISO8859-2)
   6. Brazil (ISO8859-1)
   7. Brazil (UTF-8)
   8. Bulgaria (ISO8859-5)
   9. Canada-English (ISO8859-1)
  10. Catalan, Spain (ISO8859-1)
  11. Catalan, Spain (ISO8859-15 - Euro)
  12. Croatia (ISO8859-2)
  13. Czech Republic (ISO8859-2)
  14. Denmark (ISO8859-1)
  15. Denmark (ISO8859-15 - Euro)
  16. Egypt (ISO8859-6)
  17. Egypt (UTF-8)
  18. Estonia (ISO8859-15)

Press Return to show more choices.
Please make a choice (0 - 59), or press h or ? for help:
这是选择本地语言，请注意，在这里一定要选择0. English (C - 7-bit ASCII)
输入0后按回车键；

5、如果服务器接了键盘和显示器，跳过这一步；如果是在终端上安装Solaris9，这时会出现如下提示：
What type of terminal are you using?
1) ANSI Standard CRT
2) DEC VT52
3) DEC VT100
4) Heathkit 19
5) Lear Siegler ADM31
6) PC Console
7) Sun Command Tool
8) Sun Workstation
9) Televideo 910
10) Televideo 925
11) Wyse Model 50
12) X Terminal Emulator (xterms)
13) CDE Terminal Emulator (dtterm)
14) Other
Type the number of your choice and press Return:
这是选择终端类型，我们选择 3) DEC VT100
输入3后按回车键；

6、出现如下提示：
q The Solaris Installation Program qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  The Solaris installation program is divided into a series of short sections
  where you'll be prompted to provide information for the installation. At
  the end of each section, you'll be able to change the selections you've
  made before continuing.

  About navigation...
        - The mouse cannot be used
        - If your keyboard does not have function keys, or they do not
          respond, press ESC; the legend at the bottom of the screen
          will change to show the ESC keys to use for navigation.

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
    F2_Continue    F6_Help

该提示告诉安装人员，Solaris的安装分为好几部分，每一部分后面都需要你进行确认，如果发现
有错，可以更改你先前输入的信息
按F2键继续安装；

7、出现如下提示：
q Identify This System qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  On the next screens, you must identify this system as networked or
  non-networked, and set the default time zone and date/time.

  If this system is networked, the software will try to find the information
  it needs to identify your system; you will be prompted to supply any
  information it cannot find.

  > To begin identifying this system, press F2.

admin · 发表于 2006-12-1 21:28:03

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
    F2_Continue    F6_Help

该提示告诉安装人员，要开始定义系统的名字，网络及掩码，时区及时间
按F2键继续安装；

8、出现如下提示：

q Network Connectivity qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  Specify Yes if the system is connected to the network by one of the Solaris
  or vendor network/communication Ethernet cards that are supported on the
  Solaris CD. See your hardware documentation for the current list of
  supported cards.
  Specify No if the system is connected to a network/communication card that
  is not supported on the Solaris CD, and follow the instructions listed under
  Help.

      Networked
      qqqqqqqqq
      [X] Yes
      [ ] No

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
    F2_Continue    F6_Help

安装程序提示系统是否连接了网络？使用上下箭头键移动，在合适的位置停止后，按空格键，
选中该选项；
在我们的安装中，需要网络功能，因此按F2键继续安装；

9、出现如下提示：

q DHCP qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  On this screen you must specify whether or not this system should use DHCP
  for network interface configuration.  Choose Yes if DHCP is to be used, or
  No if the interfaces are to be configured manually.

  NOTE: DHCP support will not be enabled, if selected, until after the system
  reboots.

      Use DHCP
      qqqqqqqq
      [ ] Yes
      [X] No

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
    F2_Continue    F6_Help

提示是否需要使用DHCP来配置主机的IP地址；
在我们的安装中，不使用DHCP功能，因此按F2键继续安装；

10、出现提示：
q Primary Network Interface qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  On this screen you must specify which of the following network adapters is
  the system's primary network interface.  Usually the correct choice is the
  lowest number.  However, do not guess; ask your system administrator if
  you're not sure.

  > To make a selection, use the arrow keys to highlight the option and
    press Return to mark it [X].

      Primary network interface
      qqqqqqqqqqqqqqqqqqqqqqqqq >      [X] ce0
      [ ] ge0
      [ ] eri0
      [ ] fcip0

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
    F2_Continue    F6_Help
选择主网卡（Primary Network Interface）
在我们的安装例子中，使用上下箭头键移动光标，移动到eri0处，按空格键选中该网卡，
按F2键继续安装；

11、出现提示：

q Host Name qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  On this screen you must enter your host name, which identifies this system
  on the network.  The name must be unique within your domain; creating a
  duplicate host name will cause problems on the network after you install
  Solaris.

  A host name must be at least two characters; it can contain letters, digits,
  and minus signs (-).

    Host name:rac1

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
    F2_Continue    F6_Help
输入主机名，本例中，我们输入主机名rac1后按F2键继续安装；

12、出现提示：

q IP Address qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  On this screen you must enter the Internet Protocol (IP) address for this
  system.  It must be unique and follow your site's address conventions, or a
  system/network failure could result.

  IP addresses contain four sets of numbers separated by periods (for example
  129.200.9.1).

    IP address:192.168.0.1

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
    F2_Continue    F6_Help

提示输入主机的IP地址，本例中，输入192.168.0.1后按F2键继续安装；

13、出现提示：
q Subnets qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  On this screen you must specify whether this system is part of a subnet.  If
  you specify incorrectly, the system will have problems communicating on the
  network after you reboot.

  > To make a selection, use the arrow keys to highlight the option and
    press Return to mark it [X].

      System part of a subnet
      qqqqqqqqqqqqqqqqqqqqqqq
      [X] Yes
      [ ] No

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
    F2_Continue    F6_Help
提示主机的网络是否采用子网掩码的方法，本例中，要采用子网掩码的方法，因此按F2键继续安装；

14、出现提示： q Netmask qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  On this screen you must specify the netmask of your subnet.  A default
  netmask is shown; do not accept the default unless you are sure it is
  correct for your subnet.  A netmask must contain four sets of numbers
  separated by periods (for example 255.255.255.0).

    Netmask: 255.255.255.0

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
    F2_Continue    F6_Help
提示你输入主机的子网掩码，本例中，输入255.255.255.0后，按F2键继续安装；

15、出现提示：

q IPv6 qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  On this screen you should specify whether or not IPv6, the next generation
  Internet Protocol, will be enabled on this machine.  Enabling IPv6 will have
  no effect if this machine is not on a network that provides IPv6 service.
  IPv4 service will not be affected if IPv6 is enabled.

  > To make a selection, use the arrow keys to highlight the option and
    press Return to mark it [X].

      Enable IPv6
      qqqqqqqqqqq
      [ ] Yes
      [X] No

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
    F2_Continue    F6_Help
提示你是否采用IPv6技术？本例中，不采用IPv6技术，按F2键继续安装；

16、等待一会，出现提示：

q Set the Default Route qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  To specify the default route, you can let the software try to detect one
  upon reboot, you can specify the IP address of the router, or you can choose
  None.  Choose None if you do not have a router on your subnet.

  > To make a selection, use the arrow keys to select your choice and press
  Return to mark it [X].

      Default Route
      qqqqqqqqqqqqqqqqqqqqqqqqqq
      [X] Detect one upon reboot
      [ ] Specify one
      [ ] None

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
    F2_Continue    F6_Help
提示你设置缺省网关，本例中，我们选择None，现在不设置缺省网关，以后在设置，使用上下
箭头，移动光标到[ ] None位置后，按空格键选中，然后按F2键继续安装；

17、出现如下提示：
q Confirm Information qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  > Confirm the following information.  If it is correct, press F2;
    to change any information, press F4.

                    Networked: Yes
                     Use DHCP: No
    Primary network interface: ce0
                    Host name: rac1
                   IP address: 192.168.0.1
      System part of a subnet: Yes
                      Netmask: 255.255.255.0
                  Enable IPv6: No
                Default Route: None

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
    F2_Continue    F4_Change    F6_Help

提示你确认上面输入的信息，如果上述的输入信息有错，可以按F4键后重新输入；如果正确，
按F2键后继续安装；

18、出现提示：

q Configure Security Policy: qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  Specify Yes if the system will use the Kerberos security mechanism.

  Specify No if this system will use standard UNIX security.

      Configure Kerberos Security
      qqqqqqqqqqqqqqqqqqqqqqqqqqq
      [ ] Yes
      [X] No

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
    F2_Continue    F6_Help
配置安全策略，本例中，我们选择No,因此按F2键继续安装；

19、出现提示：

q Confirm Information qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  > Confirm the following information.  If it is correct, press F2;
    to change any information, press F4.

    Configure Kerberos Security: No

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
    F2_Continue    F4_Change    F6_Help
确认刚才输入的信息，如果刚才输入的信息有错，按F4键重新输入；如果正确，按F2键继续安装；

20、出现提示：
q Name Service qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  On this screen you must provide name service information.  Select the name
  service that will be used by this system, or None if your system will either
 not use a name service at all, or if it will use a name service not listed
  here.

  > To make a selection, use the arrow keys to highlight the option
    and press Return to mark it [X].

      Name service
      qqqqqqqqqqqq
      [X] NIS+
      [ ] NIS
      [ ] DNS
      [ ] LDAP
      [ ] None

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
    F2_Continue    F6_Help
配置名字服务，本例中，我们选择None（不采用任何名字服务）。使用上下箭头移动光标到
None后，按空格键，选中该选项，按F2键继续安装；

21、出现提示：

q Confirm Information qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  > Confirm the following information.  If it is correct, press F2;
    to change any information, press F4.

    Name service: None

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
    F2_Continue    F4_Change    F6_Help

确认刚才输入的信息，如果刚才输入的信息有错，按F4键重新输入；如果正确，按F2键继续安装；

22、出现提示：
q Time Zone qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq On this screen you must specify your default time zone.  You can specify a
  time zone in three ways:  select one of the continents or oceans from the
  list, select other - offset from GMT, or other - specify time zone file.

  > To make a selection, use the arrow keys to highlight the option and
    press Return to mark it [X].

      Continents and Oceans
      qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
  -   [ ] Africa
  x   [ ] Americas
  x   [ ] Antarctica
  x   [ ] Arctic Ocean
  x   [ ] Asia
  x   [ ] Atlantic Ocean
  x   [ ] Australia
  x   [ ] Europe
  v   [ ] Indian Ocean

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
    F2_Continue    F6_Help
设置时区，使用上下箭头移动光标到Asia后，按空格键，选中该选项，按F2键继续安装；

23、出现提示：
q Country or Region qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  > To make a selection, use the arrow keys to highlight the option and
    press Return ;to mark it [X].

      Countries and Regions
      qqqqqqqqqqqqqqqqqqqqqqqq
  -   [ ] Afghanistan
  x   [ ] Armenia
  x   [ ] Azerbaijan
  x   [ ] Bahrain
  x   [ ] Bangladesh
  x   [ ] Bhutan
  x   [ ] Brunei
  x   [ ] Cambodia
  x   [ ] China
  x   [ ] Cyprus
  x   [ ] East Timor
  x   [ ] Georgia
  v   [ ] Hong Kong

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
    F2_Continue    F6_Help

择国家或地区，使用上下箭头移动光标到China后，按空格键，选中该选项，按F2键继续安装；

24、出现提示：
q Confirm Information qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
q Date and Time qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  > Accept the default date and time or enter
    new values.

  Date and time: 2003-08-18 10:36

    Year   (4 digits) : 2003
    Month  (1-12)     : 08
    Day    (1-31)     : 18
    Hour   (0-23)     : 10
    Minute (0-59)     : 36

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
    F2_Continue    F6_Help
设置时间。本例中，我们不在此设置时间，安装结束后，使用data命令修改时间。按F2键继续安装；

25、出现提示：
q Confirm Information qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  > Confirm the following information.  If it is correct, press F2;
    to change any information, press F4.

        Time zone: PRC
    Date and time: 2003-08-18 10:36:00

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
    F2_Continue    F4_Change    F6_Help

确认刚才输入的信息，如果刚才输入的信息有错，按F4键重新输入；如果正确，按F2键继续安装；

26、等待一会，出现提示：

q Solaris Interactive Installation qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  You'll be using the initial option for installing Solaris software on the
  system. The initial option overwrites the system disks when the new Solaris
  software is installed.

  On the following screens, you can accept the defaults or you can customize
  how Solaris software will be installed by:

        - Selecting the type of Solaris software to install
        - Selecting disks to hold software you've selected
        - Specifying how file systems are laid out on the disks

  After completing these tasks, a summary of your selections (called a
  profile) will be displayed.

  There are two ways to install your Solaris software:

   - "Standard" installs your system from a standard Solaris Distribution.
   - "Flash" installs your system from one or more Flash Archives.

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
     F2_Standard    F4_Flash    F5_Exit    F6_Help

选择Standard install：按F2键，继续安装；

27、等待一会，出现提示：

q Select Geographic Regions qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  Select the geographic regions for which support should be installed.

  > [ ] Australasia
  > [ ] Central America
  > [ ] South America
  > [ ] Northern Africa
  > [ ] Middle East
  > [ ] Eastern Europe
  > [ ] Northern Europe
  > [ ] Western Europe
  > [ ] Central Europe
  > [ ] Southern Europe
  > [ ] North America
  > [ ] Asia

   Move left, right, up, down using the arrow keys
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
     F2_Continue    F3_Go Back    F5_Exit    F6_Help

选择地理区域，本例中，选择Asia：使用上下箭头移动光标到Asia处，按回车键后，出现展
开的提示：
V [ ] Asia
    [ ]     Hindi UTF-8
    [ ]     Japanese EUC (ja)
    [ ]     Japanese PC Kanji (ja_JP.PCK)
    [ ]     Japanese UTF-8 (ja_JP.UTF-8)
    [ ]     Korean EUC
    [ ]     Korean UTF-8
    [x]     Simplified Chinese EUC
    [x]     Simplified Chinese GB18030
    [x]     Simplified Chinese GBK
    [x]     Simplified Chinese UTF-8
    [ ]     Thai TIS620
    [ ]     Thai UTF-8
    [x]     Traditional Chinese (Hong Kong) BIG5+HKSCS
    [x]     Traditional Chinese (Hong Kong) UTF-8
    [x]     Traditional Chinese BIG5
    [x]     Traditional Chinese EUC
    [x]     Traditional Chinese UTF-8

使用上下左右箭头移动光标到所有中文Chinese处，按空格键选中语言后，按F2键继续安装；

28、出现提示：
q Select Software qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  Select the Solaris software to install on the system.

  NOTE: After selecting a software group, you can add or remove software by
  customizing it. However, this requires understanding of software
  dependencies and how Solaris software is packaged. The software groups
  displaying 64-bit contain 64-bit support.

      [ ]  Entire Distribution plus OEM support 64-bit  2732.00 MB
      [X]  Entire Distribution 64-bit ................. 2698.00 MB
      [ ]  Developer System Support 64-bit ............ 2366.00 MB
      [ ]  End User System Support 64-bit ............. 1864.00 MB
      [ ]  Core System Support 64-bit .................  861.00 MB qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
     F2_Continue    F3_Go Back    F4_Customize    F5_Exit    F6_Help

选择   [ ]  Entire Distribution plus OEM support 64-bit  2732.00 MB：使用上下箭头
将光标移动到   [ ]  Entire Distribution plus OEM support 64-bit  2732.00 MB处，按
空格键后，按F2键继续安装；

29、出现提示：

q Select Disks qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  On this screen you must select the disks for installing Solaris software.
  Start by looking at the Suggested Minimum field; this value is the
  approximate space needed to install the software you've selected. Keep
  selecting disks until the Total Selected value exceeds the Suggested Minimum
  value.

            Disk Device (Size)        Available Space
        =============================================
        [ ] c1t0d0   (69994 MB)              69994 MB

                            Total Selected:      0 MB
                         Suggested Minimum:   1919 MB

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
     F2_Continue    F3_Go Back    F4_Edit    F5_Exit    F6_Help

选择磁盘：按空格键，选中磁盘后，按F2键继续安装；

30、出现提示：

q Preserve Data? qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  Do you want to preserve existing data? At least one of the disks you've
  selected for installing Solaris software has file systems or unnamed slices
  that you may want to save.

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
     F2_Continue    F3_Go Back    F4_Preserve    F5_Exit    F6_Help
提示是否保存数据，本例中，不保存，按F2继续安装；

31、出现提示：
q Automatically Layout File Systems? qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  Do you want to use auto-layout to automatically layout file systems?
  Manually laying out file systems requires advanced system administration
  skills.

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
     F2_Auto Layout    F3_Go Back    F4_Manual Layout    F5_Exit    F6_Help
提示是否采用自动布局文件系统：本例中，我们采用自动布局文件系统，所以按F2键继续安装；

32、出现提示：

q Automatically Layout File Systems qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  On this screen you must select all the file systems you want auto-layout to
  create, or accept the default file systems shown.

  NOTE: For small disks, it may be necessary for auto-layout to break up some
  of the file systems you request into smaller file systems to fit the
  available disk space. So, after auto-layout completes, you may find file
  systems in the layout that you did not select from the list below.

            File Systems for Auto-layout
            ========================================
            [X]  /
            [ ]  /opt
            [ ]  /usr
[ ]  /usr/openwin
            [ ]  /var
            [X]  swap

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
     F2_Continue    F5_Cancel    F6_Help

选中以下几项：
            [X]  /
            [X]  /opt
            [X]  /usr
            [ ]  /usr/openwin（不选）
            [X]  /var
            [X]  swap
然后按F2键继续安装；

33、出现提示：

q File System and Disk Layout qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  The summary below is your current file system and disk layout, based on the
  information you've supplied.

  NOTE: If you choose to customize, you should understand file systems, their
  intended purpose on the disk, and how changing them may affect the operation
  of the system.

        File system/Mount point           Disk/Slice     ;        Size
        =============================================================
        /                                 c1t0d0s0             144 MB
        /var                              c1t0d0s1              74 MB
        overlap                           c1t0d0s2           69994 MB
        swap                              c1t0d0s3             516 MB
        /opt                              c1t0d0s5              34 MB
        /usr                              c1t0d0s6            2126 MB
        /export/home                      c1t0d0s7           67098 MB

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
     F2_Continue    F3_Go Back    F4_Customize    F5_Exit    F6_Help

由于系统缺省的分区大小不合理，因此按F4，修改分区大小，出现如下提示：

q Customize Disk: c1t0d0 qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
  Boot Device: c1t0d0s0

  Entry: /                          Recommended:  110 MB     Minimum:   95 MB
================================================================================
  Slice  Mount Point                 Size (MB)
     0   /                                 144
     1   /var                               74
     2   overlap                         69994
     3   swap                              516
     4                                       0
     5   /opt                               34
     6   /usr                             2126
     7   /export/home                    67098
================================================================================
                         Capacity:       69994 MB
                        Allocated:       69992 MB
                   Rounding Error:           2 MB
                             Free:           0 MB

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
     F2_OK    F4_Options    F5_Cancel    F6_Help

修改前，删除Slice 7那一行的所有信息（7   /export/home                    67098）。
使用Tab键或上下左右键，移动光标到Slice 7处，删除该行。然后将分区修改为如下：
  Entry:                            Recommended:      MB     Minimum:      MB
================================================================================
  Slice  Mount Point                 Size (MB)
     0   /                                4099
     1   /var                             4099
     2   overlap                         69994
     3   swap                            16386
     4                                       0
     5   /opt                            10240
     6   /usr                            10240
     7                                       0
================================================================================
                         Capacity:       69994 MB
                        Allocated:       45064 MB

admin · 发表于 2006-12-1 21:31:24

按F2键继续安装；

34、出现如下提示：

q File System and Disk Layout qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  The summary below is your current file system and disk layout, based on the
  information you've supplied.

  NOTE: If you choose to customize, you should understand file systems, their
  intended purpose on the disk, and how changing them may affect the operation
  of the system.

        File system/Mount point           Disk/Slice             Size
        =============================================================
        /                                 c1t0d0s0            4099 MB
        /var                ;              c1t0d0s1            4099 MB
        overlap                           c1t0d0s2           69994 MB
        swap                              c1t0d0s3           16386 MB
        /opt                              c1t0d0s5           10240 MB
        /usr                              c1t0d0s6           10240 MB

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
     F2_Continue    F3_Go Back    F4_Customize    F5_Exit    F6_Help

按F2继续安装；

35、出现如下提示：
q Mount Remote File Systems? qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  Do you want to mount software from a remote file server? This may be
  necessary if you had to remove software because of disk space problems.

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
     F2_Continue    F3_Go Back    F4_Remote Mounts    F5_Exit    F6_Help
按F2继续安装；

36、出现如下提示：

q Profile qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  The information shown below is your profile for installing Solaris software.
  It reflects the choices you've made on previous screens.

  ============================================================================

-              Installation Option: Initial
x                      Boot Device: c1t0d0
x                  Client Services: None
x
x                          Locales: Simplified Chinese EUC
x                                   Simplified Chinese GB18030
x                                   Simplified Chinese GBK
x                                   Simplified Chinese UTF-8
x                                   Traditional Chinese (Hong Kong) BIG
x                                   Traditional Chinese (Hong Kong) UTF
x                                   Traditional Chinese BIG5
x                                   Traditional Chinese EUC
x                                   Traditional Chinese UTF-8
v

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
     F2_Continue    F4_Change    F5_Exit    F6_Help

按F2继续安装；

37、出现如下提示：
q Warning qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

        The following disk configuration condition(s) have been
        detected. Errors must be fixed to ensure a successful
        installation. Warnings can be ignored without causing the
        installation to fail.

        WARNING: Unused disk space (c1t0d0)

        WARNING: CHANGING DEFAULT BOOT DEVICE
        You have either explicitly changed the default boot device, or
        accepted the default to "Reconfigure EEPROM". In either case,
        the system's EEPROM will be changed so it will always boot
        Solaris from the device that you've specified. If this is not
        what you had in mind, go back to the disk selection screens and
        change the "Reconfigure EEPROM" setting.

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
     F2_OK    F5_Cancel

按F2继续安装；

38、出现如下提示：

q Reboot After Installation? qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  After Solaris software is installed, the system must be rebooted. You can
  choose to have the system automatically reboot, or you can choose to
  manually reboot the system if you want to run scripts or do other
  customizations before the reboot.  You can manually reboot a system by using
  the reboot(1M) command.

            [X] Auto Reboot
            [ ] Manual Reboot

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
     F2_Begin Installation    F5_Cancel

设置安装结束后，自动重启动。按F2继续安装；

39、出现如下提示：

Preparing system for Solaris install

Configuring disk (c1t0d0)
        - Creating Solaris disk label (VTOC)

Creating and checking UFS file systems
        - Creating / (c1t0d0s0)
        - Creating /var (c1t0d0s1)
  ;      - Creating /opt (c1t0d0s5)
        - Creating /usr (c1t0d0s6)

     Solaris Initial Install

            MBytes Installed:    52.22
            MBytes Remaining:  1528.16

                  Installing: Core Solaris Devices

            |
          |           |           |           |           |           |
          0          20          40          60          80         100

（正在安装Solaris Software 1/2 CD盘，请等待）

Solaris 9 software installation partially failed

Solaris 9 packages partially installed
                SUNWidecr

Customizing system files
        - Mount points table (/etc/vfstab)
        - Network host addresses (/etc/hosts)

Cleaning devices

Customizing system devices
        - Physical devices (/devices)
        - Logical devices (/dev)

Installing boot information
        - Installing boot blocks (c1t0d0s0)
        - Updating system firmware for automatic rebooting

Installation log location
        - /a/var/sadm/system/logs/install_log (before reboot)
        - /var/sadm/system/logs/install_log (after reboot)

Install of CD 1 complete.  The system will ask you for CD 2 after you reboot.
Executing SolStart postinstall phase...
Executing finish script "patch_finish"...

Finish script patch_finish execution completed.
Executing JumpStart postinstall phase...

The begin script log 'begin.log'
is located in /var/sadm/system/logs after reboot.

The finish script log 'finish.log'
is located in /var/sadm/system/logs after reboot.

syncing file systems... done
rebooting...
Resetting ...

***  FCode LP8000 PCI_Bus (lpfc) Version 1.31a5  ***

***  FCode LP8000 PCI_Bus (lpfc) Version 1.31a5  ***

Sun Fire 880, No Keyboard
Copyright 1998-2002 Sun Microsystems, Inc.  All rights reserved.
OpenBoot  4.7.5, 4096 MB memory installed, Serial #53419230.
Ethernet address 0:3:ba:2f:1c:de, Host ID: 832f1cde.

Rebooting with command: boot
Boot device: /pci@8,600000/SUNW,qlc@2/fp@0,0/disk@w500000e01042dc11,0:a  File an
d args:
SunOS Release 5.9 Version Generic_112233-03 64-bit
Copyright 1983-2002 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
configuring IPv4 interfaces: ce0.
Hostname: rac2
Configuring /dev and /devices
Configuring the /dev directory (compatibility devices)
The system is coming up.  Please wait.
checking ufs filesystems
/dev/rdsk/c1t0d0s5: is clean.
Configuring network interface addresses: ce0 eri0 ge0.
starting rpc services: rpcbind done.

On this screen you can create a root password.

A root password can contain any number of characters, but only the first eight
characters in the password are significant. (For example, if you create
`a1b2c3d4e5f6' as your root password, you can use `a1b2c3d4' to gain root
access.)

You will be prompted to type the root password twice; for security, the password
will not be displayed on the screen as you type it.

> If you do not want a root password, press RETURN twice.

Root password:

Press Return to continue.

40、系统提示你设置超级用户root的密码，本例中，输入root123后，出现如下提示：

On this screen you can create a root password.

A root password can contain any number of characters, but only the first eight
characters in the password are significant. (For example, if you create
`a1b2c3d4e5f6' as your root password, you can use `a1b2c3d4' to gain root
access.)

You will be prompted to type the root password twice; for security, the password
will not be displayed on the screen as you type it.

> If you do not want a root password, press RETURN twice.

Root password:

Re-enter your root password.

Press Return to continue.

41、系统提示你再次输入超级用户root的密码，本例中，再次输入root123，出现如下提示：

System identification is completed.
Setting netmask of ce0 to 255.255.255.0
Setting default IPv4 interface for multicast: add net 224.0/4: gateway rac2
syslog service starting.
Aug 18 11:31:00 rac2 sendmail[369]: My unqualified host name (rac2) unknown; sle
eping for retry
Aug 18 11:32:00 rac2 sendmail[369]: unable to qualify my own domain name (rac2)
-- using short name
WARNING: local host name (rac2) is not qualified; fix $j in config file
/etc/mail/aliases: 12 aliases, longest 10 bytes, 138 bytes total

Starting Web Start Launcher in Command Line Mode.

Please specify the media from which you will install Solaris 9 Software 2 of 2
(12/02 SPARC Platform Edition).

Alternatively, choose the selection for "Skip" to skip this disc and go on to
the next one.

Media:

1. CD/DVD
2. Network File System
3. Skip

   Media [1]:

42、提示你插入Solaris 9 Software 2/2 CD光盘。敲回车键，光盘弹出，并出现如下提示符：

Please insert the CD/DVD for Solaris 9 Software 2 of 2 (12/02 SPARC Platform
Edition).

After you insert the disc, please press Enter.

Enter S to skip this disc and go on to the next one.
To select a different media, enter B to go Back.
    []

43、将Solaris 9 Software 2/2 CD光盘插入CD-ROM，等待一会（大约15秒）后，按回车键继续安装；

Reading Solaris 9 Software 2 of 2 (12/02 SPARC Platform Edition).... -

Launching installer for Solaris 9 Software 2 of 2 (12/02 SPARC Platform
Edition). Please Wait...

Installing Solaris 9 packages (part 2)
（等待安装Solaris 9 Software 2/2光盘）
|-1%--------------25%-----------------50%-----------------75%--------------100%|

Installation details:

     Product                      Result     More Info
1.  Solaris 9 packages (part 2)  Installed  Available

2.  Done

   Enter the number corresponding to the desired selection for more
   information, or enter 2 to continue [2]:

43、提示你Solaris 9 Software 2/2 CD光盘已经安装完毕，敲回车键出现提示：
Please specify the media from which you will install Solaris 9 Languages (12/02
SPARC Platform Edition).

Alternatively, choose the selection for "Skip" to skip this disc and go on to
the next one.

Media:

1. CD/DVD
2. Network File System
3. Skip

   Media [1]:

44、敲回车键，弹出光盘，出现如下提示：
Please insert the CD/DVD for Solaris 9 Languages (12/02 SPARC Platform Edition).

After you insert the disc, please press Enter.

Enter S to skip this disc and go on to the next one.To select a different media, enter B to go Back.
    []

提示你将Solaris Languages光盘放入CD-ROM中；

45、将Solaris Languages光盘放入后等待15秒左右，然后敲回车键，
出现如下提示：

Reading Solaris 9 Languages (12/02 SPARC Platform Edition).... -

Launching installer for Solaris 9 Languages (12/02 SPARC Platform Edition).
Please Wait...

The following items will be installed:

Product: Solaris 9 Simplified Chinese Localization
Location: /usr
Size: 131.0 MB
--------------------------------------------------
     Solaris 9 Simplified Chinese EUC Localization    3.2 MB
Solaris 9 Simplified Chinese Common Localization    125.1 MB
SunOS 4.x Asian Compatibility Localization    4 KB
Asian User Defined Character Tool for CDE    2.7 MB

Product: Solaris 9 Traditional Chinese Localization
Location: /usr
Size: 101.5 MB
---------------------------------------------------
     Solaris 9 Traditional Chinese Common Localization    71.9 MB
Solaris 9 Traditional Chinese Localization    29.6 MB
SunOS 4.x Asian Compatibility Localization    4 KB
Asian User Defined Character Tool for CDE    2.7 MB

Product: Solaris 9 Hong Kong Traditional Chinese Localization
Location: /usr
Size: 10.6 MB
-------------------------------------------------------------
     Solaris 9 Traditional Chinese Common Localization    71.9 MB
SunOS 4.x Asian Compatibility Localization    4 KB
Solaris 9 Traditional Chinese HK Localization    10.6 MB
Asian User Defined Character Tool for CDE    2.7 MB

Ready to Install

1. Install Now
2. Start Over
3. Exit Installation

   What would you like to do [1]?

敲回车键后开始安装Solaris Languages光盘；

Installing Solaris 9 Simplified Chinese Localization
|-1%--------------25%-----------------50%-----------------75%--------------100%|

Installing Solaris 9 Traditional Chinese Localization
|-1%--------------25%-----------------50%-----------------75%--------------100%|

Installing Solaris 9 Hong Kong Traditional Chinese Localization
|-1%--------------25%-----------------50%-----------------75%--------------100%|

Installation details:

     Product                                               Result     More Info
1.  Solaris 9 Simplified Chinese Localization             Installed  Available
2.  Solaris 9 Traditional Chinese Localization            Installed  Available
3.  Solaris 9 Hong Kong Traditional Chinese Localization  Installed  Available

4.  Done

   Enter the number corresponding to the desired selection for more
   information, or enter 4 to continue [4]:

敲回车键，弹出光盘；

<Press Return to reboot the system> {"!" exits}
    []
再敲回车键，重新启动系统。

至此，系统安装完成。

admin · 发表于 2006-12-1 21:36:46

Sun图形卡驱动程序的安装方法

  1、将图形卡驱动盘放入光驱中；
  2、系统启动后，用超级用户帐号root登录系统；
rac1 console login: root
Password:〈输入root用户的密码〉
Last login: Mon Aug 18 13:02:49 on console
Sun Microsystems Inc.   SunOS 5.9       Generic May 2002
#

  3、安装图形卡设备驱动程序：
# cd /cdrom/cdrom0
/cdrom/cdrom0: does not exist
# cd /cdrom/cdrom0
# ls
Copyright     FR_Copyright  README        Solaris_9     remove
Docs          License       Solaris_8     install
# ./install
Installing SUNWpfbx.u SUNWpfbcf SUNWpfbw SUNWpfbmn for Solaris 9 ...
Installing required patch 114538-03...
*** Installation of  drivers is complete.

To remove this software, use the 'remove' script on this CDROM, or
the following script:
        /var/tmp/xvr-100.remove

A log of this installation can be found at:
        /var/tmp/xvr-100.install.2003.08.18

To configure a Sun XVR-100 accelerator, use the fbconfig
utility.  See the fbconfig(1m) and SUNWpfb_config(1m) manual
pages for more details.

*** IMPORTANT NOTE! ***
This system must be rebooted for the new software to take effect.

Reboot this system as soon as possible using the shutdown command and the
'boot -r' PROM command (see the shutdown(1M) and boot(1M) manual
pages for more details).

   4、重新引导系统：
# reboot -- -r

给新安装的Solaris 9 系统安装补丁程序

  1、系统启动后，插入Sun公司的补丁盘；

  2、用超级用户帐号root登录系统；
rac1 console login: root
Password:〈输入root用户的密码〉
Last login: Mon Aug 18 13:02:49 on console
Sun Microsystems Inc.   SunOS 5.9       Generic May 2002
#

  3、执行如下操作：
# cd /cdrom
# ls
cdrom0  eis-cd
# cd cdrom0
# pwd
/cdrom/eis-cd
# ls >CONTENTS.txt    DISCLAIMER.txt  history.txt
COPYRIGHT       README-24JUN03  sun
# cd sun
# ls
install  patch    progs    tools
# cd install
# ls
bin                copy-cd2sun.sh     profile-EIS        setup-standard.sh
bin.tar.Z          local-bin          profile-root
#
# sh setup-standard.sh

Running setup-standard with EIS-CD Vn 24-JUN-03
===============================================

******************************************************
*    You are using a EIS-CD that is > 40 days old!   *
* Please ensure that you use the most recent version *
******************************************************

Creating /var/sun for scripts, log files etc...
Loading /opt/sun/bin...
Loading /opt/sun/patchdiag-1.0.4 & patchdiag.xref...

Setting up /.profile...

Is the power saving daemon to be disabled? [y/n]: y
/etc/power.conf has been modified.

Sun keyboard Power button to be disabled? [y/n]: y
/usr/openwin/lib/speckeysd.map has been modified.

Are the buttons & dials to be disabled? [y/n]: y
File /etc/rc2.d/S89bdconfig has been renamed to /etc/rc2.d/noS89bdconfig

Remote ROOT logins probably enabled: See /etc/default/login...

For Solaris 7 & higher the crash dump is automatically enabled!
      Dump content: kernel pages
       Dump device: /dev/dsk/c1t0d0s3 (swap)
Savecore directory: /var/crash/rac2
  Savecore enabled: yes

One or more SAN Foundation Kit/SNIA Packages are not installed.

   ***********************************************************
   * EIS strongly recommends ALWAYS adding the SAN packages. *
   *                                                         *
   * You must add the SFK/SNIA packages if:                  *
   * - A SAN (Storage Area Network) will be attached  OR     *
   * - Veritas Volume Manager VxVM will be used  OR          *
   * - The server is a V880, V480, V280...                *
   *                                                         *
   * Do NOT add these packages for desktops, SSPs or SCs.    *
   ***********************************************************

Do you wish to add the SFK & SNIA packages? [y/n]: y

SFK unpacked
Installing package SUNWcfpl

Processing package instance <SUNWcfpl> from </tmp/SFK370>

fp cfgadm plug-in library
(sparc) 11.9.0,REV=2002.06.07.10.30
Copyright 2002 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
## Processing package information.
## Processing system information.
## Verifying package dependencies.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.

This package contains scripts which will be executed with super-user
permission during the process of installing this package.

Do you want to continue with the installation of <SUNWcfpl> [y,n,?]
Installing fp cfgadm plug-in library as <SUNWcfpl>

## Installing part 1 of 1.

Installation of <SUNWcfpl> was successful.
Installing package SUNWcfplx

Processing package instance <SUNWcfplx> from </tmp/SFK370>

fp cfgadm plug-in library (64-bit)
(sparc) 11.9.0,REV=2002.06.07.10.30
Copyright 2002 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
## Processing package information.
## Processing system information.
## Verifying package dependencies.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.

Installing fp cfgadm plug-in library (64-bit) as <SUNWcfplx>

## Installing part 1 of 1.

Installation of <SUNWcfplx> was successful.
Installing package SUNWsan

Processing package instance <SUNWsan> from </tmp/SFK370>

SAN Foundation Kit
(sparc) 1.0
Copyright 2001 Sun Microsystems, Inc. All rights reserved.
Using </> as the package base directory.
## Processing package information.
## Processing system information.
   2 package pathnames are already properly installed.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.

The following files are already installed on the system and are being
used by another package:
  /etc/init.d <attribute change only>
  /etc/rc3.d <attribute change only>

Do you want to install these conflicting files [y,n,?,q] ## Checking for setuid/
setgid programs.

This package contains scripts which will be executed with super-user
permission during the process of installing this package.

Do you want to continue with the installation of <SUNWsan> [y,n,?]
Installing SAN Foundation Kit as <SUNWsan>

## Installing part 1 of 1.
/opt/SUNWsan/bin/san_recover
/opt/SUNWsan/man/sman1m/cfgadm_fp.1m
/opt/SUNWsan/man/sman1m/luxadm.1m
/opt/SUNWsan/man/sman7d/scsi_vhci.7d
[ verifying class <none> ]
Modifying /opt/SUNWsan/etc/san_drivers
Modifying /opt/SUNWsan/etc/san_os
Modifying /opt/SUNWsan/patches/patchconf
[ verifying class <build> ]
[ verifying class <initd> ]
/etc/rc3.d/S50san_driverchk <linked pathname>
## Executing postinstall script.

Installation of <SUNWsan> was successful.
Installing package SUNWcfcl

Processing package instance <SUNWcfcl> from </tmp/SFK370>

Common Fibre Channel HBA API Library (Usr)
(sparc) 11.9.0,REV=2002.10.15.08.47
Copyright 2002 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
Using </> as the package base directory.
## Processing package information.
## Processing system information.
   6 package pathnames are already properly installed.
## Verifying package dependencies.
WARNING:
    The <SUNWcfclr> package "Common Fibre Channel HBA API
    Library (Root)" is a prerequisite package and should be
    installed.

Do you want to continue with the installation of <SUNWcfcl> [y,n,?] ## Verifying
disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.

This package contains scripts which will be executed with super-user
permission during the process of installing this package.

Do you want to continue with the installation of <SUNWcfcl> [y,n,?]
Installing Common Fibre Channel HBA API Library (Usr) as <SUNWcfcl>

## Installing part 1 of 1.
/usr/include/hbaapi.h
/usr/share/man/sman3/HBAAPI.3
/usr/share/man/sman3/HBA_CloseAdapter.3
/usr/share/man/sman3/HBA_FreeLibrary.3
/usr/share/man/sman3/HBA_GetAdapterAttributes.3
/usr/share/man/sman3/HBA_GetAdapterName.3
/usr/share/man/sman3/HBA_GetAdapterPortAttributes.3
/usr/share/man/sman3/HBA_GetDiscoveredPortAttributes.3
/usr/share/man/sman3/HBA_GetEventBuffer.3
/usr/share/man/sman3/HBA_GetFcpPersistentBinding.3
/usr/share/man/sman3/HBA_GetFcpTargetMapping.3
/usr/share/man/sman3/HBA_GetNumberOfAdapters.3
/usr/share/man/sman3/HBA_GetPortAttributesByWWN.3
/usr/share/man/sman3/HBA_GetPortStatistics.3
/usr/share/man/sman3/HBA_GetRNIDMgmtInfo.3
/usr/share/man/sman3/HBA_GetVersion.3
/usr/share/man/sman3/HBA_LoadLibrary.3
/usr/share/man/sman3/HBA_OpenAdapter.3
/usr/share/man/sman3/HBA_RefreshInformation.3
/usr/share/man/sman3/HBA_ResetStatistics.3
/usr/share/man/sman3/HBA_SendCTPassThru.3
/usr/share/man/sman3/HBA_SendRNID.3
/usr/share/man/sman3/HBA_SendReadCapacity.3
/usr/share/man/sman3/HBA_SendReportLUNs.3
/usr/share/man/sman3/HBA_SendScsiInquiry.3
/usr/share/man/sman3/HBA_SetRNIDMgmtInfo.3
/usr/share/man/sman3/hba.conf.3
/usr/share/man/sman3/hbaapi.3
[ verifying class <none> ]
[ verifying class <hba> ]

Installation of <SUNWcfcl> was successful.
Installing package SUNWcfclr

Processing package instance <SUNWcfclr> from </tmp/SFK370>

Common Fibre Channel HBA API Library (Root)
(sparc) 11.9.0,REV=2002.10.15.08.47
Copyright 2002 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
Using </> as the package base directory.
## Processing package information.
## Processing system information.
   2 package pathnames are already properly installed.
## Verifying package dependencies.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.

This package contains scripts which will be executed with super-user
permission during the process of installing this package.

Do you want to continue with the installation of <SUNWcfclr> [y,n,?]
Installing Common Fibre Channel HBA API Library (Root) as <SUNWcfclr>

## Installing part 1 of 1.
/opt/hbaapi/HBAAPILIB.c
/opt/hbaapi/license.htm
[ verifying class <none> ]
[ verifying class <hba> ]

Installation of <SUNWcfclr> was successful.
Installing package SUNWcfclx

Processing package instance <SUNWcfclx> from </tmp/SFK370>

Common Fibre Channel HBA API Library (Usr) (64-bit)
(sparc) 11.9.0,REV=2002.10.15.08.47
Copyright 2002 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
Using </> as the package base directory.
## Processing package information.
## Processing system information.
   3 package pathnames are already properly installed.
## Verifying package dependencies.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.

This package contains scripts which will be executed with super-user
permission during the process of installing this package.

Do you want to continue with the installation of <SUNWcfclx> [y,n,?]
Installing Common Fibre Channel HBA API Library (Usr) (64-bit) as <SUNWcfclx>

## Installing part 1 of 1.
[ verifying class <none> ]
[ verifying class <hba> ]

Installation of <SUNWcfclx> was successful.
Installing package SUNWfchba

Processing package instance <SUNWfchba> from </tmp/SFK370>

Sun Fibre Channel Host Bus Adapter Library
(sparc) 11.9.0,REV=2002.10.15.08.47
Copyright 2002 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
Using </> as the package base directory.
## Processing package information.
## Processing system information.
   2 package pathnames are already properly installed.
## Verifying package dependencies.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.

Installing Sun Fibre Channel Host Bus AdapterLibrary as <SUNWfchba>

## Installing part 1 of 1.
/usr/lib/libsun_fc.so <symbolic link>
/usr/lib/libsun_fc.so.1
[ verifying class <none> ]

Installation of <SUNWfchba> was successful.
Installing package SUNWfchbr

Processing package instance <SUNWfchbr> from </tmp/SFK370>

Sun Fibre Channel Host Bus Adapter Library (Root)
(sparc) 11.9.0,REV=2002.10.15.08.47
Copyright 2002 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
## Processing package information.
## Processing system information.
## Verifying package dependencies.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.

This package contains scripts which will be executed with super-user
permission during the process of installing this package.

Do you want to continue with the installation of <SUNWfchbr> [y,n,?]
Installing Sun Fibre Channel Host Bus Adapter Library (Root) as <SUNWfchbr>

## Executing preinstall script.
## Installing part 1 of 1.
## Executing postinstall script.

A backup of //etc/hba.conf will be placed in /tmp

Installation of <SUNWfchbr> was successful.
Installing package SUNWfchbx

Processing package instance <SUNWfchbx> from </tmp/SFK370>

Sun Fibre Channel Host Bus Adapter Library (Usr) (64-bit)
(sparc) 11.9.0,REV=2002.10.15.08.47
Copyright 2002 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
Using </> as the package base directory.
## Processing package information.
## Processing system information.
   3 package pathnames are already properly installed.
## Verifying package dependencies.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.

Installing Sun Fibre Channel Host Bus Adapter Library (Usr) (64-bit) as <SUNWfch
bx>

## Installing part 1 of 1.
/usr/lib/sparcv9/libsun_fc.so <symbolic link>
/usr/lib/sparcv9/libsun_fc.so.1
[ verifying class <none> ]

Installation of <SUNWfchbx> was successful.
Installing package SUNWfcsm

Processing package instance <SUNWfcsm> from </tmp/SFK370>

FCSM driver
(sparc) 11.9.0,REV=2002.10.15.08.47
Copyright 2002 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
Using </> as the package base directory.
## Processing package information.
## Processing system information.
   2 package pathnames are already properly installed.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.

This package contains scripts which will be executed with super-user
permission during the process of installing this package.

Do you want to continue with the installation of <SUNWfcsm> [y,n,?]
Installing FCSM driver as <SUNWfcsm>

## Installing part 1 of 1.
/kernel/drv/fcsm
/kernel/drv/fcsm.conf
[ verifying class <none> ]
## Executing postinstall script.
Reboot client to install driver.

Installation of <SUNWfcsm> was successful.
Installing package SUNWfcsmx

Processing package instance <SUNWfcsmx> from </tmp/SFK370>

FCSM driver (64-bit)
(sparc) 11.9.0,REV=2002.10.15.08.47
Copyright 2002 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
Using </> as the package base directory.
## Processing package information.
## Processing system information.
   3 package pathnames are already properly installed.
## Verifying disk ;space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.

Installing FCSM driver (64-bit) as <SUNWfcsmx>

## Installing part 1 of 1.
/kernel/drv/sparcv9/fcsm
[ verifying class <none> ]

Installation of <SUNWfcsmx> was successful.

   ***********************************************************
   * The system will break to the OBP prompt (thus stopping  *
   * operation) if a break signal is seen on the serial port.*
   * This can happen when the device attached to the serial  *
   * port (e.g. workstation or terminal) is powered on.      *
   *     This behaviour can be prevented by setting the      *
   *     Alternate Break Sequence in /etc/default/kbd.       *
   ***********************************************************

Do you wish to ENABLE the alternate break sequence? [E/n]: n

Break sequence UNCHANGED!

Automated Core File Analysis Tool (ACT).....
ACT Package is not installed - Version 8.2 available....

Do you want toinstall the ACT package? [y/n]: y

Processing package instance <CTEact> from </tmp/act>

CS CTE Automated Crash Analysis tool (http://cpre-emea.uk/tools/act.html)
(sparc) 8.2
                ACT

Copyright 1997-2003 Sun Microsystems, Inc.  All rights reserved.

enter base directory for install (Default /opt/CTEact) [?,q]

Do you wish to enable the email of panic facility [y] [y,n,?] y
Enter email address i.e root@aardvark :-

The selected base directory </opt/CTEact> must exist before
installation is attempted.

Do you want this directory created now [y,n,?,q] y
Using </opt/CTEact> as the package base directory.
## Processing package information.
## Processing system information.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.

This package contains scripts which will be executed with super-user
permission during the process of installing this package.

Do you want to continue with the installation of <CTEact> [y,n,?] y

Installing CS CTE Automated Crash Analysis tool (http://cpre-emea.uk/tools/act.h
tml) as <CTEact>

## Installing part 1 of 1.
/opt/CTEact/man/man1/act.1
/opt/CTEact/scripts/ACT_dumpscript
[ verifying class <none> ]
/opt/CTEact/bin/5.9/sparcv7/act
/opt/CTEact/bin/5.9/sparcv9/act
[ verifying class <59> ]
## Executing postinstall script.

Creating Architecture link for ACT
Creating symbolic link for ACT
Installing ACT_dumpscript in /etc/init.d
Installing Link in /etc/rc2.d

Please Modify your PATH environment variable to include /opt/CTEact/bin
Please Modify your MANPATH environment variable to include /opt/CTEact/man

Installation of <CTEact> was successful.

Explorer Package not present - will install Version 4.1.1,...

   ******************************************************
   * Please supply configuration information with care. *
   * Especially enter the following customer details:   *
   * - Company Name (case sensitive)                    *
   * - System serial number                             *
   * - Contact Name                                     *
   * - Contact email address                            *
   * - Address details                                  *
   ******************************************************

Press RETURN to continue...

Processing package instance <SUNWexplo> from </tmp/explorer>

Sun(TM) Explorer Data Collector
(sparc,i386) 4.1.1, GA
Copyright 1996-2003 Sun Microsystems, Inc.
All rights reserved.
Package SUNWexplo not yet installed.

SUN MICROSYSTEMS, INC.

SOFTWARE LICENSE AGREEMENT

SUN IS WILLING TO LICENSE THE ACCOMPANYING SOFTWARE TO YOU ONLY UPON THE
CONDITION THAT YOU ACCEPT ALL OF THE TERMS CONTAINED IN THIS LICENSE AGREEMENT.
READ THE TERMS AND CONDITIONS OF THIS LICENSE CAREFULLY BEFORE DOWNLOADING THE
SOFTWARE. BY DOWNLOADING AND OR USING THE SOFTWARE, YOU AGREE TO THE TERMS AND
CONDITIONS OF THIS AGREEMENT. IF YOU ARE NOT WILLING TO BE BOUND BY THIS
AGREEMENT, YOU ARE NOT AUTHORIZED TO DOWNLOAD OR USE THIS SOFTWARE.

1. License to Use. Customer is granted a royalty-free non-exclusive and
non-transferable license ("License") for the use of the accompanying software,
together with accompanying documentation, if any, ("Software"), only in
combination with the specific software previously licensed by you from Sun with
which this Software is intended to operate.  No other use or distribution of the
Software is authorized.

2. Restrictions. Software is copyrighted and title to all copies is retained by
Sun and/or its licensors. Customer shall not make copies of the Software, other
than as authorized above plus a single copy for archival purposes and, if
applicable, Customer may, for its internal use only, print the number of copies
of on-line documentation, if any, for which it has been authorized, in which
event all proprietary rights notices on the Software shall be reproduced and
applied. Unless enforcement of this provision is prohibited by applicable law,
Customer shall not modify, decompile, disassemble, decrypt, extract, or
otherwise reverse engineer the Software. The Software is not designed or
licensed for use in on-line control equipment in hazardous environments such
as operation of nuclear facilities, aircraft navigation or control, or direct
life support machines.

3. Confidentiality. The Software is confidential and proprietary information of
Sun and/or its licensors. Customer agrees to take adequate steps to protect the
Software from unauthorized disclosure or use.

4. Disclaimer of Warranty. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT A WARRANTY
OF ANY KIND. EXCEPT AS SPECIFIED IN THIS LICENSE, ALL EXPRESS OR IMPLIED
CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE
HEREBY EXCLUDED TO THE EXTENT ALLOWED BY APPLICABLE LAW.

5. Limitation of Liability. IN NO EVENT WILL SUN BE LIABLE FOR ANY LOST REVENUE,
PROFIT OR DATA, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE
DAMAGES HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY ARISING OUT OF
THE USE OF OR INABILITY TO USE SOFTWARE, EVEN IF SUN HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  IN NO EVENT WILL SUN BE LIABLE FOR ANY DAMAGES,
REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO
USE THE SOFTWARE, WHICH ARE GREATER THAN THE  ACTUAL PURCHASE PRICE CUSTOMER
PAID TO SUN FOR SUCH SOFTWARE.

6. Termination. This License is effective until terminated. Customer may
terminate this License at any time by destroying all copies of the Software
including any documentation.  This License will terminate immediately without
notice from Sun if Customer fails to comply with any provision of this License.
Upon termination, Customer must destroy all copies of the Software.

7. Export Regulations. The Software, including technical data, is subject to
U.S. export control laws, including the U.S. Export Administration Act and its
associated regulations, and may be subject to export or import regulations in
other countries. Customer agrees to comply strictly with all such regulations
and acknowledges that it has the responsibility to obtain licenses to export,
re-export, or import the Software.

8. U.S. Government Restricted Rights. If Customer is acquiring the Software
including accompanying documentation, if any, on behalf of the U.S.  Government,
the following provisions apply. If the Software is supplied to the Department of
Defense ("DOD"\), the Software is subject to "Restricted Rights", as that term i
s
defined in the DOD Supplement to the Federal Acquisition Regulations ("DFAR") in
paragraph 252.227-7013(c) (1). If the Software is supplied to any unit or agency
of the United States Government other than DOD, the Government's rights in the
Software will be as defined in paragraph 52.227-19(c) (2) of the Federal
Acquisition Regulations ("FAR"). Use, duplication, reproduction or disclosure by
the Government is subject to such restrictions or successor provisions.
Contractor/Manufacturer is: Sun Microsystems, Inc., 2550 Garcia Ave., Mountain
View, CA 94043.

9. Governing Law. This Agreement is made under, shall be governed by and
construed in accordance with the laws of the State of California, U.S.A.,
excluding its choice of law provisions.

10. Severability. If any of the above provisions are held to be in violation of
applicable law, void, or unenforceable  in any jurisdiction, then such
provisions are herewith waived to the extent necessary for the License to be
otherwise enforceable in such jurisdiction,   However, if in Sun's opinion
deletion of any provisions of the License by operation of this paragraph
unreasonably compromises the rights or liabilities of Sun or its licensors, Sun
reserves the right to terminate the License and require the destruction or
return of the Software.

11. INTEGRATION. This Agreement is the entire agreement between you
and Sun relating to its subject matter. It supersedes all prior and
contemporaneous oral and written communications, proposals,
representations and warranties and prevails over any conflicting or
additional terms of any quote, order, acknowledgment, or other
communication between the parties relating to its subject matter
during the term of this Agreement. No modification of this Agreement
will be binding, unless in writing and signed by an authorized
representative of each party. You may not assign this Agreement
to any third party without Sun's prior written consent.

[此贴子已经被作者于2006-12-1 21:47:55编辑过]

wangfei0528 · 发表于 2011-2-9 13:01:39

版主辛苦！这么详细！怎么会没人顶！我顶！

账号		自动登录	找回密码
密码			马上注册